Shanghai Yinma Marking Co., Ltd.
Jet printing integrity, Mark safety----Win the future
Add to Cart
10W 20000 hours life CO2 laser marking machine with US imported laser generator
Introduction
Laser ink jet printer, in the control of computer, make the laser beam through the high frequency vibration lens and focus lens to etch equipment identification information symbols on surface.
CO2 laser printing machine’s wavelength is 10.64um,10.2um or 9.3um. It is small,and the life of laser generator is long, so it is the widely used in logo printing market. Not only it can static spray printing, but also can online dynamic spray printing. It is used for the surface printing of paper, wood, plastic, paint, glass, ceramics .
Classified by the configuration, CO2 laser printing machine mainly has 10w, 15w, 30w, 50w and 100 w power laser for enterprises to choose . If it is dynamic spray printing, the faster the power, the higher the spray printing.
YM-1210B+ is a 10W CO2 laser machine with 9.3um wavelength US imported laser generator. It can mark the EXP date of the matte effect on the surface of the water bottles. Mainly used for 10000bph water bottles , paper or plastic Packaging and other products batch number , time , barcode marking.
Technical parameters
| Model | YM-1210B+ |
| Laser ink jet printer | RF CO2 |
| Power of laser (W) | 10 |
| Maximum line velocity(mm/s) | ≦7000 |
| Wavelength of laser | 9.3um |
| Etching depth (mm) | ≦5 |
| Code range(mm) | 100×100~150×150 |
| Minimum character(mm) | 0.4 |
| Minimum line width(mm) | 0.15 |
| Positional repeatability(mm) | ±0.01mm |
| Printing form | Dynamic code/Static code |
| Control system | Fully automatic high speed engraving software |
| Control form | Computer/Portable controller |
| Scan form |
High-speed two-dimensional Scanning galvanometer |
| Overall power(W) | 500,700,800 |
| Cooling form | Air cooling |
| Power requirement | 220V,50Hz,8A |
| Work environment | Temperature 5-45℃ humidity 5%-90% |
| Life of laser generator | ≥20000 Hours |
| Unsuitable material | Metals/PE plastics |
FAQ
1. Q: Can you send me the video to show how the machine works?
A: Certainly, we have made video of every machine and you can get them.
2. Q: How can I know your machine works well?
A: Before delivery, we have tested every machine and if you have special production condition, we could adjust the machine for you.
3. Q: How can I know your machine is designed for my product?
A: You could tell us your product which need to mark and give us the picture of your product. We will look for the similar one in the market, and then we test it on machine, finially show you the effects.
4. Q: Do you have a ISO certificate?
A: Sure.